◇真空和面機可根據工藝要求設定和面時間、真空度。缸體具有密封性能好，面粉無跑冒現象。
Filled the vacuum mixer can be set according to the technical requirement and time and vacuum degree. Cylinder has a good seal performance, flour without running phenomenon.
◇真空和面機是在真空狀態下模擬手工和面的原理，使面筋網絡快速形成，和面配水量在常規工藝基礎上可適量增加約20%?？焖侔韬?，使小麥蛋白質在最短的時間內吸收水份，比常規狀態下和制的面團熟化程度提高2倍以上，且不損傷已形成的蛋白質面筋網絡結構。
Filled the vacuum mixer is under the vacuum state simulation by hand and the principle of the gluten network form quickly, and with water, on the basis of conventional process could increase about 20%. Fast mixing, wheat protein in the shortest possible time to absorb moisture, and making dough maturation degree than that of conventional condition increased by more than 2 times, and does not damage the protein gluten has been formed network structure.
◇真空和面機使得蛋白組織結構均衡，使面的筋性、咬勁、拉力都遠遠優于其他形式和面機的和面效果。
Filled the vacuum mixer protein structure equilibrium, make a tendon, strength, tension is much better than the other forms and effect of dough.
◇真空和面機加工出來的面品，面團均勻、彈性好、面制品滑爽、可口、有咬勁、面筋力高、透明度高。
Filled the vacuum dough processing come out in front of the product, the dough evenly, good elasticity, flour products, smooth, delicious, al dente, high surface thews, high transparency.
◇真空和面機V字形板式槳葉在面箱中繞主軸的軸線作回轉運動，由于槳葉向兩邊推動面團，所以可以解決受力不均現象，使機器運轉平穩。
Filled the vacuum mixer v-shape plate blade in surface box around the axis of the main shaft rotary motion, because on both sides of the blade to push the dough, so can solve uneven phenomenon, make the machine run smoothly.
◇真空和面機這樣可保證固定于主軸上的槳葉在轉動時運轉軌跡為一圓柱體。同時又抵消了推動面團而產生的軸向力。能夠使機器在運轉時更加穩定，提高整機使用壽命。
Filled the vacuum mixer can ensure fixed on the spindle blade in the turns running track for a cylinder. Offset the again at the same time promote the dough and the axial force. When can make the machine running more stable and improve the service life of the machine.
◇真空和面機真空和面機主要由機架、機體、可旋轉和面箱、和面箱蓋、機械傳動部分、真空部分、電控部分等組成。
Filled the vacuum mixer and vacuum mixer is mainly composed of frame, body, rotating and boxes, and lid, mechanical transmission parts, vacuum parts, electronic parts, etc.